Admin: /* Hard Reset (Factory Defaults) */

2026-02-18T08:05:13Z

Hard Reset (Factory Defaults)

Admin at 08:04, 18 February 2026

2026-02-18T08:04:34Z

Admin at 08:04, 18 February 2026

2026-02-18T08:04:17Z

Admin at 08:00, 18 February 2026

2026-02-18T08:00:50Z

Admin: Created page with "Category:Wiki '''''[https://it-arts.net/index.php/Category:Wiki Return to Wiki Index]''''' == System Access and Privilege Modes == === User EXEC Mode === /cfg/login Description: Accesses the user EXEC mode. Example: /cfg/login === Privileged EXEC Mode === /cfg/enable Description: Switches to the privileged EXEC mode. Example: /cfg/enable ==== Exit and Session Termination ====
2026-02-18T08:00:00Z

Created page with "Category:Wiki '''''[https://it-arts.net/index.php/Category:Wiki Return to Wiki Index]''''' == System Access and Privilege Modes == === User EXEC Mode === <nowiki> /cfg/login</nowiki> Description: Accesses the user EXEC mode. Example: <nowiki> /cfg/login</nowiki> === Privileged EXEC Mode === <nowiki> /cfg/enable</nowiki> Description: Switches to the privileged EXEC mode. Example: <nowiki> /cfg/enable</nowiki> ==== Exit and Session Termination ==== <nowiki..."

New page
[[Category:Wiki]]

'''''[https://it-arts.net/index.php/Category:Wiki Return to Wiki Index]'''''

== System Access and Privilege Modes ==

=== User EXEC Mode ===
<nowiki>
/cfg/login</nowiki>

Description:
Accesses the user EXEC mode.

Example:
<nowiki>
/cfg/login</nowiki>

=== Privileged EXEC Mode ===
<nowiki>
/cfg/enable</nowiki>

Description:
Switches to the privileged EXEC mode.

Example:
<nowiki>
/cfg/enable</nowiki>

==== Exit and Session Termination ====
<nowiki>
/exit
/logout</nowiki>

Example:
<nowiki>
/exit</nowiki>

== System Configuration ==

=== Hostname Configuration ===
<nowiki>
/cfg/system/hostname Alteon-5208
/cfg/system/hostname Alteon-DataCenter</nowiki>

Example:
<nowiki>
/cfg/system/hostname Alteon-5208
/cfg/system/hostname Alteon-DataCenter</nowiki>

=== Banner Configuration ===
<nowiki>
/cfg/system/banner motd "Unauthorized access is prohibited"
/cfg/system/banner motd "Only authorized personnel can access this device."</nowiki>

Example:
<nowiki>
/cfg/system/banner motd "Unauthorized access is prohibited"
/cfg/system/banner motd "Only authorized personnel can access this device."</nowiki>

=== Time and NTP Configuration ===
<nowiki>
/cfg/system/timezone UTC 0
/cfg/system/ntp server 192.168.100.10</nowiki>
Example:
<nowiki>
/cfg/system/ntp server 10.10.10.5</nowiki>

=== Management IP Configuration ===
<nowiki>
/cfg/system/interface mgmt/ip-address 192.168.1.10/24
/cfg/system/interface mgmt/ip-address 10.0.0.10/24</nowiki>

Example:
<nowiki>
/cfg/system/interface mgmt/ip-address 192.168.1.10/24
/cfg/system/interface mgmt/ip-address 10.0.0.10/24</nowiki>

== Interface and VLAN Configuration ==

=== Physical Port Configuration ===
<nowiki>
/cfg/network/port 5/enable
/cfg/network/port 5/disable</nowiki>

Example:
<nowiki>
/cfg/network/port 3/enable</nowiki>

=== Assign IP Address to Interface ===
<nowiki>
/cfg/network/port 2/ip-address 172.16.10.2/24
/cfg/network/port 8/ip-address 192.168.50.2/24</nowiki>

Example:
<nowiki>
/cfg/network/port 2/ip-address 172.16.10.2/24
/cfg/network/port 8/ip-address 192.168.50.2/24</nowiki>

=== VLAN Creation ===
<nowiki>
/cfg/network/vlan 100
/cfg/network/vlan 100/name DMZ</nowiki>

Example:
<nowiki>
/cfg/network/vlan 200
/cfg/network/vlan 200/name INTERNAL</nowiki>

=== VLAN Port Assignment ===
<nowiki>
/cfg/network/vlan 100/tagged 1
/cfg/network/vlan 100/untagged 2</nowiki>

Example:
<nowiki>
/cfg/network/vlan 200/tagged 3
/cfg/network/vlan 200/untagged 4</nowiki>

== Routing Configuration ==

=== Default Route ===
<nowiki>
/cfg/network/ip-route 0.0.0.0/0 192.168.1.1
/cfg/network/ip-route 0.0.0.0/0 10.0.0.1</nowiki>

Example:
<nowiki>
/cfg/network/ip-route 0.0.0.0/0 10.0.0.1</nowiki>

=== Static Route ===
<nowiki>
/cfg/network/ip-route 10.10.0.0/16 192.168.1.254
/cfg/network/ip-route 172.16.0.0/16 10.0.0.254</nowiki>

Example:
<nowiki>
/cfg/network/ip-route 172.16.0.0/16 10.0.0.254</nowiki>

== High Availability Configuration ==

=== HA Group Definition ===
<nowiki>
/cfg/ha/group 1
/cfg/ha/group 1/peer 10.0.0.2
/cfg/ha/group 1/enable</nowiki>

Example:
<nowiki>
/cfg/ha/group 10
/cfg/ha/group 10/peer 192.168.100.2
/cfg/ha/group 10/enable</nowiki>

=== HA Status Verification ===
<nowiki>
/cfg/ha/status</nowiki>

== Server Load Balancing Configuration ==

=== Real Server Definition ===
<nowiki>
/cfg/slb/real-server WEB1 10.0.1.11/80
/cfg/slb/real-server APP1 172.16.1.20/443</nowiki>

Example:
<nowiki>
/cfg/slb/real-server APP1 172.16.1.20/443</nowiki>

=== Health Check Configuration ===
<nowiki>
/cfg/slb/health-check HTTP-CHECK
/cfg/slb/health-check HTTP-CHECK/type http
/cfg/slb/health-check HTTP-CHECK/url "/health"</nowiki>

Example:
<nowiki>
/cfg/slb/health-check TCP-CHECK
/cfg/slb/health-check TCP-CHECK/type tcp</nowiki>

=== Service Group Configuration ===
<nowiki>
/cfg/slb/group WEB-GRP
/cfg/slb/group WEB-GRP/add WEB1
/cfg/slb/group WEB-GRP/method roundrobin</nowiki>

Example:
<nowiki>
/cfg/slb/group APP-GRP
/cfg/slb/group APP-GRP/add APP1
/cfg/slb/group APP-GRP/method leastconn</nowiki>

=== Virtual Server Configuration ===
<nowiki>
/cfg/slb/virtual-server VIP1 203.0.113.10/80
/cfg/slb/virtual-server VIP1/service WEB-GRP
/cfg/slb/virtual-server VIP1/enable</nowiki>

Example:
<nowiki>
/cfg/slb/virtual-server PUBLIC-HTTPS 198.51.100.10/443
/cfg/slb/virtual-server PUBLIC-HTTPS/service APP-GRP
/cfg/slb/virtual-server PUBLIC-HTTPS/enable</nowiki>

== Security Configuration ==

=== SSH Access ===
<nowiki>
/cfg/system/ssh enable
/cfg/system/ssh version 2</nowiki>

Example:
<nowiki>
/cfg/system/ssh enable</nowiki>

=== User Account Creation ===
<nowiki>
/cfg/system/user admin password StrongPass! role admin
/cfg/system/user operator password OpPass123 role operator</nowiki>

Example:
<nowiki>
/cfg/system/user operator password OpPass123 role operator</nowiki>

=== Management Access Restriction ===
<nowiki>
/cfg/system/access-management 10.10.10.0/255.255.255.0
/cfg/system/access-management 192.168.50.0/255.255.255.0</nowiki>

Example:
<nowiki>
/cfg/system/access-management 192.168.50.0/255.255.255.0</nowiki>

== Monitoring and Logging ==

=== Display Configuration ===
<nowiki>
/cfg/system/show running-config</nowiki>

=== Interface Monitoring ===
<nowiki>
/cfg/system/show interface
/cfg/system/show interface port 5</nowiki>

=== Routing Table Display ===
<nowiki>
/cfg/system/show ip-route</nowiki>

=== Logging Configuration ===
<nowiki>
/cfg/system/logging host 10.1.1.50
/cfg/system/logging level info</nowiki>

Example:
<nowiki>
/cfg/system/logging host 192.168.100.50</nowiki>

== Configuration Management ==

=== Save Configuration ===
<nowiki>
/cfg/system/save</nowiki>

Example:
<nowiki>
/cfg/system/save</nowiki>

=== Backup Configuration ===
<nowiki>
/cfg/system/backup tftp 10.0.0.50 backup.cfg
/cfg/system/backup tftp 192.168.1.50 adc-backup.cfg</nowiki>

Example:
<nowiki>
/cfg/system/backup tftp 192.168.1.50 adc-backup.cfg</nowiki>

== Troubleshooting ==

=== Basic Connectivity Tests ===
<nowiki>
/cfg/system/ping 8.8.8.8
/cfg/system/traceroute 8.8.8.8</nowiki>

Verify reachability and routing path.

=== Interface Issues ===
<nowiki>
/cfg/system/show interface</nowiki>

Check link status, administrative state, and error counters.

=== HA Problems ===
<nowiki>
/cfg/ha/show status</nowiki>

Confirm active/standby role and synchronization state.

=== SLB Service Not Responding ===
<nowiki>
/cfg/slb/show group
/cfg/slb/show real-server</nowiki>

Verify health check status and server availability.

=== Configuration Not Persisted ===
<nowiki>
/cfg/system/show running-config</nowiki>

Ensure configuration is saved using:
<nowiki>
/cfg/system/save</nowiki>

== Resetting Configuration ==

This chapter outlines the process for resetting the configuration on an Alteon Application Switch 5208. There are different methods for resetting the configuration, including clearing all settings, restoring factory defaults, or performing a soft reset.

=== Soft Reset (Reboot) ===

A soft reset allows the switch to reboot without clearing the configuration. It can be used when you need to refresh the system without losing any saved settings.

<nowiki>
/reset</nowiki>

Description:
This command will reboot the system, retaining all current configurations.

Example:
<nowiki>
/reset</nowiki>

==== After Reboot ====
Once the switch reboots, you can verify the status with the following command:

<nowiki>
/cfg/system/show status</nowiki>

This will display the current state of the system and confirm that the reboot was successful.

=== Hard Reset (Factory Defaults) ===

A hard reset restores the switch to its factory default settings. This means that all configurations will be lost, and the switch will revert to the default IP address, hostname, and settings.

To perform a factory reset, follow these steps:

1. Connect to the switch via the console port using a terminal client like PuTTY or HyperTerminal.
2. Power off the switch.
3. Press and hold the reset button on the front panel of the switch.
4. Power the switch on while still holding the reset button for about 10-15 seconds.
5. Release the reset button. The switch will now boot up with factory default settings.

Alternatively, the following command can be used to perform a hard reset via the CLI:

<nowiki>
/cfg/system/reset-factory</nowiki>

Description:
This command will erase all configurations and reset the switch to its factory defaults.

Example:
<nowiki>
/cfg/system/reset-factory</nowiki>

After this process, the switch will require reconfiguration from scratch, including setting the management IP, hostname, and network settings.

==== Verify Reset to Factory Defaults ====
To confirm that the switch has been reset to factory defaults, you can check the configuration:

<nowiki>
/cfg/system/show running-config</nowiki>

This should show minimal or default configurations such as the default IP address `192.168.1.1`, default hostname, and other initial settings.

=== Resetting Specific Configuration Elements ===

In some cases, you might only need to reset certain elements, such as VLAN configurations or interfaces, rather than the entire system.

==== Reset VLAN Configuration ====
To remove a specific VLAN configuration, use the following command:

<nowiki>
/cfg/network/vlan <vlan_id>/reset</nowiki>

Example:
<nowiki>
/cfg/network/vlan 100/reset</nowiki>

This command will reset the specified VLAN to its default settings.

==== Reset Interface Configuration ====
To reset an individual interface configuration, use the following command:

<nowiki>
/cfg/network/port <port_number>/reset</nowiki>

Example:
<nowiki>
/cfg/network/port 5/reset</nowiki>

This will reset the settings for that particular interface, including IP addresses, VLAN assignments, and other configurations.

=== Clearing the Configuration from the Flash Memory ===

If you want to delete the current configuration completely from the switch's flash memory, use the following command:

<nowiki>
/cfg/system/clear-flash</nowiki>

Description:
This command will completely clear the configuration stored in the flash memory, requiring a reboot to apply the changes.

Example:
<nowiki>
/cfg/system/clear-flash</nowiki>

Once the configuration is cleared, the system will boot with the default configuration.

=== Important Notes ===

* Backup Configurations: Before performing any reset actions, it is crucial to back up your current configuration to avoid losing important settings. Use the following command to back up to a TFTP server:

<nowiki>
/cfg/system/backup tftp <tftp_ip> <backup_filename></nowiki>

* Reconfiguration: After performing a hard reset, you will need to reconfigure the switch from scratch. This includes setting up VLANs, IP addresses, HA groups, and other configurations.

== Useful Links ==

* Radware Support Portal — https://support.radware.com/
* Radware Knowledge Center — https://support.radware.com/Knowledge-Center/
* Radware Community — https://community.radware.com/
* Radware Documentation Library — https://www.radware.com/resources/
* Alteon CLI Reference Guide — https://www.radware.com/products/alteon/
* Alteon Support Page — https://www.radware.com/products/alteon-support/
* Alteon Application Switch Technical Documentation — https://www.radware.com/products/alteon/documentation/
* Alteon Product Page — https://www.radware.com/products/alteon-application-switch/
* Radware Download Center — https://support.radware.com/Downloads/
* Radware Knowledge Base — https://support.radware.com/knowledgebase/
* Radware YouTube Channel (for tutorials) — https://www.youtube.com/user/RadwareOfficial/

---

'''''[https://it-arts.net/index.php/Category:Wiki Return to Wiki Index]'''''

ALTEON - Menu Commands - Revision history

Admin: /* Hard Reset (Factory Defaults) */

Admin at 08:04, 18 February 2026

Admin at 08:04, 18 February 2026

Admin at 08:00, 18 February 2026